por favor tengo un corolla fx 87 motor 4a de 16 valvulas me urge el torque si alguien me puede ayudar, gracias

The torque specs are as follows:
Cylinder head bolts: 32ft/lbs, start at the center and work your out to the end, do this to both heads
Tighten each headbolt 90 degrees more in the same sequence
Tighten them again 90 degrees more in the same sequence, that's it.
The cam bearing caps:
Tighten to 10ft/lbs
The intake manifold bolts:
Around 15ft/lbs

Muchas gracias, muy amable.